Stereo Removal advice for Chrysler 300c

出自Ubuntu 正體中文 Wiki

跳轉到: 導航, 搜尋

Chrysler adores to promote its 300 sedan as the greatest rolling accessory for any gritty urban backdrop. The Chrysler 300 is a full-size sedan first shown at the 2003 New York Auto Show as a notion car.

You'll first need to take away the factory CD-PLAYER, in case you had like to set a fresh radio. Chrysler 300 versions come common with equally a solitary-disc CD player or a six-disc CD player, conditioned up on the model.

Chrysler 300 05-07 Stereo Eliminating. Measure 1: Unclip trim around radio. Step 2: Eliminate 4 screws holding radio human anatomy. Unplug wiring harness. Pulling the antenna cable right in the radio without pulling on the locking antenna connector could harm the cable or radio.

Disconnect the antenna cable by pulling the locking antenna connector away from the radio. Setup - a battery re-connect process should be done anytime the battery was disconnected.

When changing your factory radio with an aftermarket car stereo, a dash kit is critical for a fast and professional looking setup. It's going to securely mount your stereo in the dash and will result in a professional gapless end between your radio and the dashboard.

The Double-Din install trim kit is afterwards needed to afterwards lower the factory radio bezel to the appropriate size of an after-market Double Din Double Din radio install wiring harness, trimming kit and Antenna Adapter.

The harness can save time plus aggravation. If you loved this information and you would want to receive more details with regards to Chrysler Radioblende please visit our own web site. To get it to use only unplug your factory radio from the harness in the dashboard. The antenna adapter is used to accommodate the factory antenna conclusion to the standard Motorola male end demand to plug into your aftermarket radio.

Install instrument panel center bezel. Link battery negative cable.